NAT Through VLAN interface to 2 VRRP Routers

Reply
L0 Member

NAT Through VLAN interface to 2 VRRP Routers

I would like to do a static 1:1 NAT through a VLAN interface to two Cisco routers for redundancy.

 

The Cisco routers will be running VRRP to provide a virtual IP address to the PA firewall.  The PA will be connected to both routers through a different physical interface.

 

My assumption is that I can put the 2 PA physical interfaces into a common VLAN, NAT through the logical interface instead of the physcial one and the NAT connection will have a next hop of the VRRP IP.  This will then send any natted packets to whatever router is currently acting as the VRRP master and has the master address.

 

Can anyone confirm that my assumptions are correct and this will work? 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!