12-28-2011 04:05 PM
Hi,
My setup is like below.
e1/1 - To Internet
e1/2 - To MPLS WAN - Learns remote site routes via OSPF as type-2 external routes.
e1/3 - Internal network
Tunnel.x - One tunnel to each of the 9 remote sites.
My network works fine and learns remote routes via WAN and Tunnel. However the tunnel routes are taking preference because they are learned as Oi routes which are always preferred over O2 routes by the protocol design.
Is there any way to make tunnel routes less preferred over the WAN? OR only option I have here is to use a different routing protocol for tunnel that's less preferred than OSPF?
Thanks in advance,
Sam
12-28-2011 05:06 PM
You could modify the administrative distance of the different types of OSPF routes on the General tab within the Virtual Router.
Cheers,
Kelly
12-28-2011 05:06 PM
You could modify the administrative distance of the different types of OSPF routes on the General tab within the Virtual Router.
Cheers,
Kelly
12-28-2011 05:28 PM
I ended up running RIP for the tunnels and OSPF for the WAN. Its working fine now. Thanks for the suggestion though.
03-01-2019 11:25 AM
I modified this setting and it seems to only take effect after reboot. Is there a way for it to work without reboot?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
