On-Site Spare using

Reply
L0 Member

On-Site Spare using

Good day, dear colleagues! We bought two PA-220 and two PA-220 on-site spares. Total we have 4 firewalls - 2 main and 2 on-site spare. But we installed 1 main device and 1 spare. Could this be a problem in the future? Or from the vendor's side these are 4 identical devices? All firewalls was pre-activated. Thank you for a help!

Tags (2)
Community Manager

Re: On-Site Spare using

how are the 2 devices being displayed on the support portal?

if the spare is being displayed on the support portal as a -SSO device, you should not be able to activate licences on it, which in turn will cause it to function normally for all regular traffic and app-id, but not for threatprevention, url filtering or wildfire, so you will need to swap that one out


Help the community: Like helpful comments and mark solutions
Reaper out
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!