PA Device Interfaces Fail Open

Reply
Highlighted
L1 Bithead

PA Device Interfaces Fail Open

Greetings,

Will PA device interfaces fail open if the device has a power failure, similar to IDS/IPS sensors which have relay in the interfac?

thx,

Bill

L7 Applicator

Re: PA Device Interfaces Fail Open

Hi Bill,

No, there are no hardware relays on the firewalls. This is purposefully designed to allow for any configuration of interfaces. A pair of interfaces with a hardware relay would necessarily tie those to interfaces together and only allow a transparent (virtual wire) configuration to be functional during a power outage. As is, the firewalls can have any two interfaces in virtual wire mode, or any other combination of L2, L3, Tap, etc.

Hope this helps,

Greg

L3 Networker

Re: PA Device Interfaces Fail Open

PAN devices cannot support the interfaces physical relay like other IPS & IDS  devices during the device powered down as we are a firewall device supporting L3 , L2 modes.


L1 Bithead

Re: PA Device Interfaces Fail Open

Thanks for the quick reply.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!