I have a couple of Nintendo consoles on the network which would like to connect for online gaming.
I am on a cable connection so am using Dyndns lookup for my external-IP.
I have the following Bi-Directional NAT policies configured.
It seems to work with the Wii U but not with the 3DS.
Any assistance will be much appreciated.
As a last resort I could dig out my old Draytek router for these hosts but would prefer not too...
> If you can take a packet capture and also see the traffic logs so see what's really happening with the traffic
> And then you can make the required changes in the NAT/Security Policies
> Instead of creating bi-directional try creating separate NAT policy for out going traffic and the incomming traffic
>>>please specify which zone the internal-wiiU belongs
You can see the same by the command
test routing fib-lookup virtual-router default ip <ip address>
Please see the zone of the ip address by the above command and make Nat rule accordingly
to make sure a bidirectional NAT policy works as expected, the proper formatting would need to be trust to untrust
hope this helps
Thanks to all responding.
I tried the following but no luck...
If I click on 'Highlight Unused Rules', the Bi-Directional NAT rules are highlighted so the traffic is not even hitting those NAT rules.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!