- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
11-19-2019 03:18 PM
New Panorama 9.0.5 install. Panorama was successfully installed in a VM on a single disk. Needed space for a log volume so a second disk was created and attached to the VM. VM was rebooted, disk added using “request system disk add sdb”, disk is visible via “show system disk details", shows Admin Enabled state.
When attempting to use this volume in “Managed Collectors”, the disk doesn't show when we click Add. Tried multiple reboots to no avail.
11-19-2019 03:56 PM
Problem solved by tech support.
Under "Managed Collectors" add and enter just the serial number of the collector. Commit the changes. Attempt to add a new collector and the disk will appear in the list.
11-19-2019 03:56 PM
Problem solved by tech support.
Under "Managed Collectors" add and enter just the serial number of the collector. Commit the changes. Attempt to add a new collector and the disk will appear in the list.
03-29-2024 01:43 PM
We just updated to 10.2.x and had issues after adding the disk.
We had a similar issue.
The disk would show up in the console (SSH session) and would show ready, but we could not add them to the collector.
After making a minor tweak to an object description and doing a "COMMIT" we were able to add the disk to the collector.
Don't forget to Commit after adding the disks via SSH and after adding to the collector in the GUI.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!