Query on Split tunneling

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Query on Split tunneling

L4 Transporter

Hello,

 

We are trying  to exclude one IP from including routing in split tunneling.

VPN is working, however, I found that when going to 192.168.16.22, still through VPN rather than local LAN.

What we need to setup is ONLY this range, 192.168.0.0/16, will be accessed via VPN except one particular IP shown below.
Looks like we need to use include and exclude both to achieve this or do we have any other method?

 

Config.png

1 REPLY 1

L7 Applicator

perhaps run "route print" on local device to ensure route command has taken.

 

also... if your /32 host is non routable then it will then try the default (tunnel) route as it just has a higher metric value.

  • 1725 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!