Redistribution Profiles - Source Types

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Redistribution Profiles - Source Types

L0 Member

Hi. I need to redistrubute some routes (loopbacks, and statics) into BGP.

 

Are their any advantages to having the source type as static vs connected under Virtual Router - Redistrubtion Profile - then go into Redistrubution Profile - Source Type.

 

Thanks.

1 REPLY 1

L4 Transporter

Static and connected are two different sources so you wouldn't want to use them interchangeably.

Connected would be a network that is directly defined on the firewall. Ex: Loop0 has an IP address of 10.1.1.1/24. The connected route for that is 10.1.1.0/24. 

Static route redist is to get static routes defined on the firewall into BGP. 

  • 2527 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!