SNMP monitor parameters for Palo Alto

Reply
L4 Transporter

SNMP monitor parameters for Palo Alto

Hello,

I have two PA500 with software version 5.0 and i would like to know if i can monitorize using SNMP (Nagios) the following parameters of my Palo Alto.

- CPU Usage dataplane and management
- memory
- Current sessions
- Hard disk space
- State and use of  interfaces

Also wanted to know if i could monitorize in Panorama these parameters:
- CPU Usage
- memory
- Disco


And the last thing........Where can i find the OID for these previous parameters???????


Thanks a lot



L4 Transporter

Re: SNMP monitor parameters for Palo Alto

soporteseguridad wrote:

Hello,

I have two PA500 with software version 5.0 and i would like to know if i can monitorize using SNMP (Nagios) the following parameters of my Palo Alto.

- CPU Usage dataplane and management
- memory
- Current sessions
- Hard disk space
- State and use of  interfaces

Also wanted to know if i could monitorize in Panorama these parameters:
- CPU Usage
- memory
- Disco

Yes (although I personally recommend and have set up Zabbix, because it gives me trending and alerting, all in one box)

soporteseguridad wrote:

And the last thing........Where can i find the OID for these previous parameters???????


Thanks a lot



Search for "SNMP" here:

Then click on the "Enterprise SNMP MIB 5.0" link

L4 Transporter

Re: SNMP monitor parameters for Palo Alto

Hi

Some OID you requested are these:

DataPlane1.3.6.1.2.1.25.3.3.1.2.2
Management1.3.6.1.2.1.25.3.3.1.2.1

SessionActive1.3.6.1.4.1.25461.2.1.2.3.3
SessionActiveTcp1.3.6.1.4.1.25461.2.1.2.3.4
SessionActiveUdp1.3.6.1.4.1.25461.2.1.2.3.5

INTERFACES

(BUT you need to add .NUMBER at the end for the different instances/interfaces

for example MGMT .1
for Ha1 .2
for eth1/ .3

ifDescr1.3.6.1.2.1.2.2.1.2DESCRIPTION
ifOperStatus1.3.6.1.2.1.2.2.1.8Status
ifSpeed1.3.6.1.2.1.2.2.1.5Speed

ifInBroadcastPkts1.3.6.1.2.1.31.1.1.1.3Broadcast packets IN
ifInDiscards1.3.6.1.2.1.2.2.1.13Discard Paquets IN
ifInErrors1.3.6.1.2.1.2.2.1.14Errors IN
ifInMulticastPkts1.3.6.1.2.1.31.1.1.1.2Multicast packets in
ifInNUcastPkts1.3.6.1.2.1.2.2.1.12Non-unicast packets IN
ifInOctets1.3.6.1.2.1.2.2.1.10Octects packets in
ifInUcastPkts1.3.6.1.2.1.2.2.1.11Unicast packets in

ifOutBroadcastPkts1.3.6.1.2.1.31.1.1.1.5Broadcast packets OUT
ifOutDiscards1.3.6.1.2.1.2.2.1.19Discard OUT
ifOutErrors1.3.6.1.2.1.2.2.1.20error OUT
ifOutMulticastPkts1.3.6.1.2.1.31.1.1.1.4Multicast Out
ifOutNUcastPkts1.3.6.1.2.1.2.2.1.18Non-unicast out
ifOutOctets1.3.6.1.2.1.2.2.1.16Octect Out
ifOutUcastPkts1.3.6.1.2.1.2.2.1.17Unicast Packets OUT

Hope it help you

Highlighted
L5 Sessionator

Re: SNMP monitor parameters for Palo Alto

Below document have some good information on the OIDs

Supported MIBs

https://live.paloaltonetworks.com/docs/DOC-1269

https://live.paloaltonetworks.com/docs/DOC-4129

Let us know if this helps,

Best Regard

Numan

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!