Slow internet performance behind PA-500

Reply
L0 Member

Slow internet performance behind PA-500

I recently upgraded to a 250Mbps internet speed.

When I plug my laptop directly into the ISP router I am getting close to 300Mbps.

But behind the PA-500 firewall, I am getting around 80-90Mbps.

Firmware is 7.1.10 running in HA

 

What would cause this?

L7 Applicator

Re: Slow internet performance behind PA-500

Do you have threat prevwntion enabled?

Community Team Member

Re: Slow internet performance behind PA-500

Hi @skiffsumner

 

What debugging have you done so far ? This can be related to a bunch of things ...

 

What features are enabled on the device ? (see @vsys_remo's previous reply).

Is the link status negotiated correctly with your ISP ?

Are you seeing lots of errors or drops in the global counters ?

 

Here are some links that can help you start debugging or some discussions that experienced slow internet :

 

https://live.paloaltonetworks.com/t5/Management-Articles/Troubleshooting-Slowness-with-Traffic-Manag...

https://live.paloaltonetworks.com/t5/Management-Articles/DHCP-ARP-and-Slow-Internet-Packets-Dropped-...

https://live.paloaltonetworks.com/t5/General-Topics/SLOW-INTERNET/m-p/41527#M30530

 

Cheers !

-Kiwi

L4 Transporter

Re: Slow internet performance behind PA-500

@vsys_remo wrote:

Do you have threat prevwntion enabled?


 

This is most likely the issue.  We ran into the same thing for our sites that have either gigabit fibre links or 120+ Mbps point-to-point wireless links.  All our LibreNMS traffic monitoring graphs were showing almost flatlines at 100 Mbps throughout the day, and we could not figure out why.

 

Until we looked at the product details page for the PA-500.  It's listed right there that Threat Protection is limited to 100 Mbps throughput.  Any rule that has that enabled will limit traffic to 100 Mbps.

 

There's a few other limits listed as well (250 Mbps for application filtering, or something like that).  The more in-depth the filtering, the slower the throughput.  You'll only get line-speed filtering on the most basic of rules (port and protocol, basically).


Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!