Timeout Countdown for defined applications

Reply
L0 Member

Timeout Countdown for defined applications

Hi

Currently running a pair of active/passive 4020's and I have a question regarding timout values set on applications.

I have set up a new application with a TCP timeout value of 4 hours, is there any way of monitoring the count down from 4 hours to 0 for a given connection. i.e through the monitor tab.

I am trying to prove an application is definitely using the timeout value that has been set on the application, and would appreciate any help or advice.

Highlighted
Not applicable

Re: Timeout Countdown for defined applications

Would using the packet capture feature allow you to do this?

You could watch the recieve or transmit captures to see when the last packet was sent.  You shouldn't see anything in the drop capture before 4 hours from the time the last packet went through.

We had to deal with a lot of timeout issues during our migration from Checkpoint to Palo.  Reading packet captures was about the best way I found to monitor stuff.

The session browser should show you some time to live figures as well.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!