When I configure two virtual routers on a PA-5060, how do I get them to see each others’ routes?
Do I need to configure some kind of virtual internal circuit between the two routers?
Solved! Go to Solution.
If you are wanting to use dynamic routing protocol for inter-vr routing.
may need to configure physical connections to each vr
Above mentioned snap shot will work. Vrouter1 is the destination VR which holds route "192.168.1.0/24".
Let us know for further query.
"OSPF can be used for inter-VR routing provided physical interface and cabling is done between the Virtual Routers. Physical interface and cabling is required since OSPF neighbor has to be point to point or broadcast. OSPF does not support routing via static routes to its neighbor."
That's interesting -- does that mean I would need to provision a crossover ethernet cable between two physical interfaces to get OSPF working between two virtual routers?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!