URL not accessible even after providing full access to the source.

Reply
L1 Bithead

URL not accessible even after providing full access to the source.

Currently running PAN-OS-8.1.0. I am unable to access a site even after removing the filtering and all i see the logs is an incompelete application.

 

Kindly provide your suggestions

L3 Networker

Re: URL not accessible even after providing full access to the source.

it may causing by lot of reasons,

  • check which policy you are hitting, if you have a application based rules, your traffic may be not matching with desired rule. check for application default pots and check is your traffic is going to same ports.
  • you may not have NAT....etc
L6 Presenter

Re: URL not accessible even after providing full access to the source.

Do you have bi-directional traffic?  (look at packets sent / received column)

 

Do you know how to route to your destination?

 

Also like @Abdul_Razaq mentioned could easily be a NAT problem.  (Perhaps you don't have the right source/dest zone in your nat policy?)

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!