User-ID configuration guide for version 4.1.2

[kalyanram.piratla]

Hi Guys,

I was just wondering if you guys (PAN) could come up with a document on the installation guide for User-ID version 4.1.2.  I did look up the knowledge base and found out various documents regarding Syslog, API and other stuff.  But I am looking for more basic installation of the Agent on the Domain Controller ( User Identification, Setup and Discovery).  It does look pretty straight forward, but I have always struggled when it comes to using the Setup tab on the User-ID agent.

Looking forward to hear from you guys.

Thank you

Kind Regards,

Kal

[jdelio]

I have found 2 documents about User-ID (User Identification)

Install PAN User-ID:

https://live.paloaltonetworks.com/docs/DOC-1104

Configure PAN User-ID:

https://live.paloaltonetworks.com/docs/DOC-1112

I hope this addresses your inquiry.

Kind Regards,

[kalyanram.piratla]

That was not I as actually looking for.  I have gone through them before posting this.  I was more interested with the New User-ID agent configuration which is the only agent available under version 4.1.X.

I did finally figure out on configuring it after many attempts on customer sites.  I will shortly document something on it and if possible share it out.

Regards,

[chickernell]

Has a configuration guide been developed yet for UserID Agent v4.1.2 and later?

[jseals]

Here are some updated docs for the newer agent and 4.1.x software. Please let us know if this is what you were looking for.

4.1 Agent setup:

https://live.paloaltonetworks.com/docs/DOC-2132

4.1 User-ID Tech Note:

https://live.paloaltonetworks.com/docs/DOC-3120

Thanks,

Jason Seals

[chickernell]

These documents you provided do not explain how to configure the User-ID agent after installation.  I have the agent installed and running, but I have no instructions for configuring it to monitor the security logs, subnets, groups, etc.

[bobmillington]

I too am struggling with configuration after install.  Is there a link to the updated guide?....and I dont need the guide User-ID Agent Initial Installation and Setup.  Seems weird the only other document is User-ID Best Practices and trial and error.