VM-100 Virtual Wire doesn't show any sessions

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

VM-100 Virtual Wire doesn't show any sessions

L2 Linker

 Hi guys, I'm new to PA so I hope this is not a stupid question.

 

I configured my VM-100 with two interfaces (plus manegment), the two interface were setup as Virtual Wire. I can capture traffic going through and everything works from a user perspective. However, I get 0 sessions on the FW and no hits on any of the policies. I even created an universal policy with any-any, alow, log and nothing. I get 1 hit "insuffient data" every 12 hours or so.

 

Any suggestion would be greatly appreciated!

5 REPLIES 5

Cyber Elite
Cyber Elite

was the vm activated and is your support license active ?

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

Yes, it is:

VM LicenseVM-100
VM ModeVMWare ESXi
Software Version8.0.0
GlobalProtect Agent0.0.0
Application Version678-3929 (03/28/17)
Threat Version678-3929 (03/28/17)
Antivirus Version2197-2684 (03/29/17)
WildFire Version126980-128338 (03/29/17)
URL Filtering Version20170329.40154
GlobalProtect Clientless VPN Version61-62 (03/03/17)

@Hwinter, What does your licensing screen actually state? This would be consistant with an unlicensed VM; if you have the licenses applied try to retrieve the licenses again and restart and see if that brings things back on line. 

 

It might be worth checking the logrcvr by running show system software status and if it comes to it maybe even debug software restart process log-receiver to see if that clears things up before you actually restart the device. 

Thanks Bryp. I tried re-uploading the key, but everything looks fine from a licensing perspective.

 

process look fine too, logrcvr is running:

Capture.PNGCapture2.PNG

I'm actually on the line with PA Support... for almost one hour! I'm actually glad they didnt figure it out in seconds... as I have spent HOURS on this!

If anyone is having this problem, I was not able to get it to work. I open a case and they are working on it. In the meantime, I changed the configuration using L3 interface and I see all sessions, everything works.

However, when I configure the VM-100 with Layer 2 interfaces or Virtual Wire did not work at all. Traffic goes through but PA sees no sessions, no logs, no gits on any policy.

  • 2428 Views
  • 5 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!