Wie starten mit PA220 und 8.0

L3 Networker

Wie starten mit PA220 und 8.0



ich suche ein Start Tutorial in welchem einfach erklärt wird, wie man mit der PA220 startet. Also dieser Beginner Guide hab ich schon, IP vergeben etc. Aber nun welche Regeln sind Empfehlungen, wie blockiert man diverse URLs? Wie baut man einen VPN-Tunnel zwischen zwei PA220 auf, eine Fallback Leitung einrichten. Und noch vieles mehr.


Ich suche mir da irgendwie einen Wolf .. oder sehe vor lauter Bäumen den Wald nicht...



Tags (2)
L7 Applicator

Re: Wie starten mit PA220 und 8.0


Auto translate seems to have butchered your last sentence. But I would recommend that you take a look at the link below, it'll help you get started on the actual administration side of things. 


Community Team Member

Re: Wie starten mit PA220 und 8.0

Hi @clonesheep,


In addition, a good place to start is to check out the 'Getting Started' series right here on Live.


They offer a bunch of information and tips/tricks on how to use and configure a bunch of the most used features of your Palo Alto device.


2017-09-27_09-43-24.jpgGetting Started series


Cheers !




L3 Networker

Re: Wie starten mit PA220 und 8.0

Yes, autotranslating is not good. Then i must use my bad english...


But then i will use the Getting Starting and read there a bit.

Are there orther good blogs or pages for PaloAlto knowhow?

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!