asa to pan migration

L2 Linker

asa to pan migration

i had a migration from asa to pan which failed

curent conectivity is

asa (no change)<>switch (no change)<>asa (to be replaced)

planned connectivity is

asa (no change)<>switch (no change)<>pan (replacing asa)


i reused ips from asa on new pan and cleared arp on no change asa but tcp sessions failed due to incomplete/aging out. static routing is fine. do i have to clear arp on pan as well since its installed in parallel and connected to the same l2 switch? it seems like a black hole issue...

L7 Applicator

Re: asa to pan migration


Sounds like only a clear arp on the l2 switch should do it.


Hope that helps.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!