How to download the Report Latency, Jitter & Packet loss of last 3 Months

Hello Team,

We need your help to generate the report of latency, jitter, and packet loss of the last three months.

New GlobalProtect VPN connected but network connectivity lost after short time

Hi all,

Something must have gone wrong in my config I just don't know what.  Here is the situation.  This is a new setup on PA-820 we have the GlobalProtect license.  Some users including myself will connect to the vpn fine, access resources on the n

Disappearing configurations

I have a strange situation. Every few months, I find all components of a feed (miner, aggregator and feed), removed from the configuration. Very few people have access to the system and I am on the only one that makes edits.

I have edited the sourc

ESXi Bootstrap Cant find init-cfg.txt

IPsec tunnel connectivity issues

Hi, I have an IPsec Tunnel between 2 PA's and the status of tunnel and iKE shows red but the interface is green. Please advice on the troubleshooting steps.

Backup and Restore PA Panorama and Firewalls setup to new infra in Azure

Hi friends,

Want to setup a parallel infra for current production environment where current configuration should be used in new VMs(Panorama and Two Firewalls) . How can we export only  current security policies ,objects, and import to new setup (man

phase-2 sa purge mismatch SPI:0x00000000/0x07A04C1A

i am able to establish tunnel with vendor

can ping the vendor lan ip

but ikemgr shows

2019-05-02 13:01:54.000 -0600 [PWRN]: { : 94}: phase-2 sa purge mismatch SPI:0x00000000/0x07A04C1A.

VPN tunnel and NAT rules

I have to create a VPN tunnel between two businesses.  The main objective is that company A needs to provide access to the following subnets to company B:

10.10.1.144/28

10.1.2.144/28

I've got all the tunnel info set up, and there is just a public IP

shared policy for device group context

Hi , can anyone help me to confirm whether we can create shared custom policy for dedicated device group context 

We want to hear your thoughts - Enhanced LIVEcommunity Experience

Now that the enhanced LIVEcommunity experience is live, we want to hear your feedback and also help address any questions you may have! Please use this discussion post to share your thoughts or ask questions. 

You can find a walkthrough of all of t

Traffic to one internet IP address to use specific interface and WAN IP

Afternoon all!

I'm sure this is easy on our PA850 firewall but I can't figure it out.

Interface setup

• ethernet1/1 - Internal networks - Zone LAN
• ethernet1/5 - Primary internet line with /27 IP range - Zone WAN
• ethernet1/6 - Secondary internet line with