I have a problem with palo alto PA-850. I configure domain controllers and end users diference zone. example: zone name: Server for domain controllers, and zone: User for end users.
I setup policy to allow all traffic from Zone: Server to Zone: User and from User to Server. but end users could not authenticate with domain controllers. I checked in traffic logs: To-Port: 135, 445, Aplication: Incomplete. Please help to advise
Solved! Go to Solution.
Try following the packet with PCAPs (is the server actually getting the packet ? Is the server returning the packet correctly ?)
Good luck !
I checked in PCAPs, the server is not getting the packet. but from client, I can ping or tracert to the server, even access network share on the server. just cannot authenticate when end users login. Please help to advise, do I need to configure any thing
the rule i setup:
source zone: User;
source address: any;
destination zone: Server;
destination address: any;
What if you actually look at the session ID in the CLI; does that give you any additional insight. Your security policy looks fine as the only thing you are really doing is analyzing the zones.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!