ftp export log

Reply
Highlighted
Not applicable

ftp export log

Anyone know how to translate this show CLI command into the ftp export equivalent?

> show log traffic src in 10.0.0.0

> ftp export log traffic ?? (assuming query would work)

I would prefer not to export all logs only need a subset.

Thanks,

Monica

L7 Applicator

Re: ftp export log

The following worked (copied the query from the query builder in Monitor >traffic log):

on PA:

> ftp export log traffic query "addr.src in 192.168.53.212" start-time equal 2014/04/23@00:00:00 end-time equal 2014/04/24@00:00:00 to user:pass@10.66.18.169

On FTP Server:

$ less 53-PA-5050_traffic_2014_04_23_00_00_00_to_2014_04_24_00_00_00_0.csv

Domain,Receive Time,Serial #,Type,Threat/Content Type,Config Version,Generate Time,Source address,Destination address,NAT Source IP,NAT Destination IP,Rule,Source User,Destination User,Application,Virtual System,Source Zone,Destination Z

one,Inbound Interface,Outbound Interface,Log Action,Time Logged,Session ID,Repeat Count,Source Port,Destination Port,NAT Source Port,NAT Destination Port,Flags,IP Protocol,Action,Bytes,Bytes Sent,Bytes Received,Packets,Start Time,Elapsed

Time (sec),Category,Padding,seqno,actionflags,Source Country,Destination Country,cpadding,pkts_sent,pkts_received

1,2014/04/23 00:00:11,0009C100708,TRAFFIC,end,1,2014/04/23 00:00:12,192.168.53.212,4.2.2.2,10.66.24.53,4.2.2.2,openrule,,,dns,vsys1,trust-L3,untrust-L3,ethernet1/4,ethernet1/3,,2014/04/23 00:00:11,250042,1,53148,53,44317,53,0x400000,udp,allow,261,82,179,2,2014/04/22 23:59:39,31,any,0,1020013,0x4000000000000000,192.168.0.0-192.168.255.255,United States,0,1,1

1,2014/04/23 00:00:18,0009C100708,TRAFFIC,end,1,2014/04/23 00:00:19,192.168.53.212,172.17.132.243,10.66.24.53,172.17.132.243,openrule,,,netbios-ns,vsys1,trust-L3,untrust-L3,ethernet1/4,ethernet1/3,,2014/04/23 00:00:18,610294,1,137,137,44313,137,0x400000,udp,allow,184,184,0,3,2014/04/22 23:59:44,33,any,0,1020014,0x4000000000000000,192.168.0.0-192.168.255.255,172.16.0.0-172.31.255.255,0,3,0

Not applicable

Re: ftp export log

Cool, easy enough ;-)  Thanks so much!

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!