Anyone know how to translate this show CLI command into the ftp export equivalent?
> show log traffic src in 10.0.0.0
> ftp export log traffic ?? (assuming query would work)
I would prefer not to export all logs only need a subset.
Solved! Go to Solution.
The following worked (copied the query from the query builder in Monitor >traffic log):
> ftp export log traffic query "addr.src in 192.168.53.212" start-time equal 2014/04/23@00:00:00 end-time equal 2014/04/24@00:00:00 to user:firstname.lastname@example.org
On FTP Server:
$ less 53-PA-5050_traffic_2014_04_23_00_00_00_to_2014_04_24_00_00_00_0.csv
Domain,Receive Time,Serial #,Type,Threat/Content Type,Config Version,Generate Time,Source address,Destination address,NAT Source IP,NAT Destination IP,Rule,Source User,Destination User,Application,Virtual System,Source Zone,Destination Z
one,Inbound Interface,Outbound Interface,Log Action,Time Logged,Session ID,Repeat Count,Source Port,Destination Port,NAT Source Port,NAT Destination Port,Flags,IP Protocol,Action,Bytes,Bytes Sent,Bytes Received,Packets,Start Time,Elapsed
Time (sec),Category,Padding,seqno,actionflags,Source Country,Destination Country,cpadding,pkts_sent,pkts_received
1,2014/04/23 00:00:11,0009C100708,TRAFFIC,end,1,2014/04/23 00:00:12,192.168.53.212,188.8.131.52,10.66.24.53,184.108.40.206,openrule,,,dns,vsys1,trust-L3,untrust-L3,ethernet1/4,ethernet1/3,,2014/04/23 00:00:11,250042,1,53148,53,44317,53,0x400000,udp,allow,261,82,179,2,2014/04/22 23:59:39,31,any,0,1020013,0x4000000000000000,192.168.0.0-192.168.255.255,United States,0,1,1
1,2014/04/23 00:00:18,0009C100708,TRAFFIC,end,1,2014/04/23 00:00:19,192.168.53.212,172.17.132.243,10.66.24.53,172.17.132.243,openrule,,,netbios-ns,vsys1,trust-L3,untrust-L3,ethernet1/4,ethernet1/3,,2014/04/23 00:00:18,610294,1,137,137,44313,137,0x400000,udp,allow,184,184,0,3,2014/04/22 23:59:44,33,any,0,1020014,0x4000000000000000,192.168.0.0-192.168.255.255,172.16.0.0-172.31.255.255,0,3,0
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!