panorama adding a new device. replacement of another that had fails

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

panorama adding a new device. replacement of another that had fails

L2 Linker

I have added a new firewall to Panorama. The new appliance shows a onnected state. This is a replacement of a firewall that had failed,
Now i want to delete the other firewall (with fails) that has several vsys,
no matter what i do, i cannot to change nothing.
Is the firsr time that i am trying to do this.
i had read in a KB that i can to use a cli command but my panorama shows an error.
I am stucked.. please any help will be very appreciated

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

Hi @rocioha

 

There is actually a 'replace' command that replaces the ol;d serial number with the new one so you don't need to do any other actions

 

you'll probably want to remove the new device you added s your config is back to as it was before, and then run the 'replace' from CLI

 

How to Replace a Managed Device with a New Device on Panorama from the CLI

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

View solution in original post

2 REPLIES 2

Cyber Elite
Cyber Elite

Hi @rocioha

 

There is actually a 'replace' command that replaces the ol;d serial number with the new one so you don't need to do any other actions

 

you'll probably want to remove the new device you added s your config is back to as it was before, and then run the 'replace' from CLI

 

How to Replace a Managed Device with a New Device on Panorama from the CLI

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

Hi @reaper, thanks for your help. yes, the command works, but with pan-os 7.0.7 there is a bug that cause several problems if you dont follow all the required steps, in fact even if you have followed all the steps. ----, .. I found this and was very sad, to finish my issue i did: open all my policies -one by one, and change the arget appliance.. ..
i am moving to pan-os 7.1.11 in a couple of days./ this version fix this issue.

 

have a nice day!! 

  • 1 accepted solution
  • 2593 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!