I have added a new firewall to Panorama. The new appliance shows a onnected state. This is a replacement of a firewall that had failed,
Now i want to delete the other firewall (with fails) that has several vsys,
no matter what i do, i cannot to change nothing.
Is the firsr time that i am trying to do this.
i had read in a KB that i can to use a cli command but my panorama shows an error.
I am stucked.. please any help will be very appreciated
Solved! Go to Solution.
There is actually a 'replace' command that replaces the ol;d serial number with the new one so you don't need to do any other actions
you'll probably want to remove the new device you added s your config is back to as it was before, and then run the 'replace' from CLI
Hi @reaper, thanks for your help. yes, the command works, but with pan-os 7.0.7 there is a bug that cause several problems if you dont follow all the required steps, in fact even if you have followed all the steps. ----, .. I found this and was very sad, to finish my issue i did: open all my policies -one by one, and change the arget appliance.. ..
i am moving to pan-os 7.1.11 in a couple of days./ this version fix this issue.
have a nice day!!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!