"Interface X has no zone configuration" error when commiting

Reply
Highlighted
L1 Bithead

"Interface X has no zone configuration" error when commiting

wut.PNG

The loopback interfaces clearly are assigned to security zones.  Version 5.0.1

L6 Presenter

Re: "Interface X has no zone configuration" error when commiting

What if you for the first commit just set "none" as security zone and on the second commit select "trust"?

I also thinking if the ip's you selected for loopback perhaps cannot exist on trust since the range they are part of already exists on a different zone (like untrust or such)?

L1 Bithead

Re: "Interface X has no zone configuration" error when commiting

Nope on both counts.

L5 Sessionator

Re: "Interface X has no zone configuration" error when commiting

Hi,

Can you revert it to running config  and then make the changes again. Let us know if that helps.

Also another things you can try is to put them on a different zone if possible and then try to do the commit and see if that helps.

Thank you

Numan

L1 Bithead

Re: "Interface X has no zone configuration" error when commiting

Hi,

I had the same problem. For me the solution was to configure the zones and commit at the CLI level.

L1 Bithead

Re: "Interface X has no zone configuration" error when commiting

Thanks.  This worked.  Sounds like it should be added to the bug list.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!