show session all filter application ssl tunnel-decap no

L4 Transporter

show session all filter application ssl tunnel-decap no

need to know when i run below command 

 

show session all filter application ssl tunnel-decap no

 

it shows lot of output and app is ssl

 

which traffic is this?

 

is this traffic where ssl decryption is going on?

Highlighted
L2 Linker

Re: show session all filter application ssl tunnel-decap no

admin> find command keyword tunnel-decap
show session all start-at <1-2097152> filter nat <none|source|destination|both> ssl-decrypt <yes|no> tunnel-inspected <yes|no> tunnel-decap <yes|no> decrypt-mirror <yes|no> count <yes|no> type <flow|predict> state <initial|opening|active|discard|closing|closed> from <value> to <value> source <ip/netmask> destination <ip/netmask> source-user <value> destination-user <value> source-port <1-65535> destination-port <1-65535> protocol <1-255> application <value> rule <value> nat-rule <value> qos-rule <value> pbf-rule <value> hw-interface <value> ingress-interface <value> egress-interface <value> min-kb <1-1048576> qos-node-id <0-5000>|<-2> qos-class <1-8> vsys-name <value>|<any> rematch <security-policy>

 

admin> show session all filter application ssl tunnel-


+ tunnel-decap       session is outer tunnel with inspection enabled
+ tunnel-inspected   session is inside tunnel

 

"show session all" is a command that, it will not surprise you to learn, shows all your currently active sessions.  The filter the "tunnel-decap" option specifies whether you want to look at sessions that have been decapsulated from a tunnel, such as a GRE or L2TP tunnel.  In your command, your "tunnel-decap no" specifies you're interested in sessions that are not decapsulated from a tunnel.  If you aren't doing any tunneling, my guess is that output would look identical to if you didn't have it at all.

L4 Transporter

Re: show session all filter application ssl tunnel-decap no

we are not using any tunnel gre or l2.

 

I did not get you what u mean?

L7 Applicator

Re: show session all filter application ssl tunnel-decap no

If there are no tunnels then your command in initial post shows exactly correct.

show session all filter application ssl tunnel-decap no

 

If you change it to "yes" then you should have no sessions in output.

show session all filter application ssl tunnel-decap yes

Enterprise Architect @ Cloud Carib www.cloudcarib.com
ACE (3.0, 5.0, 6.0, 7.0), PCNSE (6, 7), PCNSI
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!