If passive panorama is going through reboot.
Active Panorama shows passive panorama as unknown
what will happen if i suspend the active Panorama ?
will all the firewalls connected to the Active panorama will get disconnected?
Solved! Go to Solution.
It sounds like HA has not fully initialized yet, I would not suspend at all until you can fully verify that one unit is active and one is passive - for both Panorama and Firewall HA alike.
Typically after a reboot you will see HA finalize init state after the autocommit process completes.
i need to know what will happen if i suspend the active panorama while passive is rebooting?
will active will show all firewalls disconnected?
Correct. If the passive Panorama is down and you suspend the Active Panorama, then the firewalls will disconnect from Panorama.
As I believe you ascertained in a previous post - despite the fact they are disconnected, the firewalls will still have their configuration and continue to pass traffic.
one more question on that
IF firewall is configured to send logs to external connector.
Firewall is disconnected from the panorama can it still pull up logs from external collector?
The firewall still has the capability to forward logs to other destinations if it is disconnected from Panorama, yes.
For example, you have a log forwarding profile with a syslog server profile attached and forward to Panorama option checked. Even if the firewall is disconnected from Panorama the logs will still be sent to the syslog server.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!