the show interface command

Reply
L2 Linker

the show interface command

Hello!

I have a question regarding the show interface command.

When you enter for example "show interface ethernet1/3" to see the information of that interface, you can eventually see counters for receive errors or drops. Are these errors counted from the last time data plane was restarted?

And is there an option similar to "filter delta yes" for physical interfaces, as a way to "reset" those errors? "show interface ethernet1/3 filter delta yes" doesn't seem to work...

Thanks in advance!
Highlighted
L7 Applicator

Re: the show interface command

According to documentation:

"These are the interface counters from the time the data-plane started on the firewall. These counters can be cleared with a data-plane restart only."

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClWoCAK

Enterprise Architect @ Cloud Carib www.cloudcarib.com
ACE (3.0, 5.0, 6.0, 7.0), PCNSE (6, 7), PCNSI
L2 Linker

Re: the show interface command

Thanks for your answer, Raido, I suspected it but you've confirmed it.

 

 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!