Version 3.3 is here !!
Attached is the documentation, please review it before use the new version.
If you dont have internet access from your MT you can use the offline update provided here as well. Remember to unzip the file first.
Note for the first time we introduced support for ikev1 IPSEC L2L within Cisco ASA configurations. Please take this in consideration when use it and please report anything you consider is wrong or can be enhanced, let's use the power of this community to improve the tool.
[MT-157] - Added Multi Edit on Nat Rules
[MT-174] - Add support for Regions under Objects
[MT-220] - Add CISCO VPN L2L support (First version)
[MT-223] - Zones. Remove or Set Interfaces in the zones by selecting them
[MT-275] - Rename IPSecTunnel, IKE Gateway and Zones with a single click
[MT-276] - Attach IKE V1 and IKE V2 Profiles to the selected IKE Gateways
[MT-167] - Created new Tab for VPN. Added support for IPSec Tunnels, GlobalProtect and NetworkProfiles
[MT-181] - Reduced by 52x the time to import a Palo Alto Networks configuration.
[MT-216] - Added the option to Enable/Disable Rule Filters
[MT-219] - NAT. SRX and Screenos. Support for Rules where a SNAT and DNAT its applied.
[MT-252] - SNIPPETS. Added support for Applications-Groups, Address, Services and Wildfire Profiles. Multiple entries are supported inside some snippets. Check Documentation.
[MT-253] - Virtual Router Editor. Added a Checkbox to add all the Interfaces with a single click
[MT-269] - Consolidation. Added the field Action
[MT-270] - Policy Filters: Clear button clear all Filters if any is selected and closes the view automatically
Have fun !!
Updated with a change in the OUTPUT Api Manager behavior, now all is EDIT instead of SET when SubAtomic is selected.