On MT 3.2.8, have an invalid address group (see ORIGINAL below), note object shows as being in-use by policy. Used "Fix >500" to correct the problem (see AFTER FIX below), note the parent is shown as still in-use, however both new members are unused! If you don't notice the change in usage, and delete unused objects, you end-up with just the parent object group, without any members (see FINAL below).
I was in process of converting a Cisco config, although doubt it matter what the source platform is.
Please after the FIX, Can you click on the green ballon under objects to recalcualte used Objects please and let us know if then shows you are they used? Thx
Sorry, forgot to mention that pressing the green button to recalculate DOES show the members as used. The issue stands when you forget to perform the re-calculation, and use delete unused objects first, particularly when you have a lot of objects that needed fixing. Perhaps a note indicating to perform recalculate since last objects change, or better yet, automatically recalc after running "Fix >500".
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!