04-19-2018 12:08 PM
Has anyone gotted the DHS AIS Miner working in MineMeld? We have an account with DHS and I configured the Miner with our subscription id as well as our certs. The miner shows all green (see attached screen-shtot), but I am not getting any indicators. Not sure what I am doing wrong, and DHS doesn't support MineMeld. I noticed that Unit 42 wrote the prototype, so I was hoping one of them might be able to answer my post and point me in the right direction.
05-07-2018 05:52 AM
No, the error counters typically stay at 2 or 4 and never move from there. I am working with Dan James on this, and it appears that the feed we are getting from DHS has ACS/ISA markings, and MineMeld does not support them. Dan is working on some new code to add the support and he was able to get a subscription to the feed in question, so I think that we will probably get this working shortly.
05-07-2018 08:02 AM
Currently we do not have this working. As soon as we get it working, DHS has asked me to write documentation for the process. I will also try to remember to post the write up here as well.
05-09-2018 10:56 AM
Dan James mentioned that you might be able to help me with a request I have. I am looking for a document that describes the entire makeup of the .yml file itself as well as all the possible options that can go into a prototype.
05-17-2018 10:59 AM
Here is the latest... I am working with one of the PA engineers on this. It appears that the Federal feed uses ACS/ISA markings and MineMeld does not support them. The PA engineer wrote some new code for this support and it was approved by the package maintainers and he is waiting for them to be merged into the code. No eta on when this will happen. We are making progress!
06-01-2018 05:42 AM
I heard from my contact at Palo Alto last week, and his code for support of the markings in the FEDGOV collection was approved and is waiting for the next release cycle to be pushed out. Once I get the updated code, I'll test everything and update this thread.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!