Slow GP throughput in AWS

Reply
L0 Member

Slow GP throughput in AWS

Doing a PoC of a Palo Alto Bundle 2 to see if we can send internet traffic through it from our main sites to replace our existing Web Proxy. While it appears that the design is working, the Agent is very slow.  I have a Squid proxy setup in the same VPC and if I point my browser to it, I can get up to 600 Mbps download speeds, but using the agent I am seeing less than 10 Mbps, quite a drastic difference.

 

I also have issues with split tunneling not working, the local routing table is not receiving the local networks assigned under exclude.

 

I have a case open on this, but it is not being addressed.

L2 Linker

Re: Slow GP throughput in AWS

Is this using PANOS 8.0? I assume you are sending all your traffic directly to internet from your GP Gateway?

L1 Bithead

Re: Slow GP throughput in AWS

It is 8.0.1, and it uses an Elastic IP for Internet facing traffic. The Agent is on my laptop in Corp over a Direct Connect 10 Gb connection. The tunnel connection for the GW is on the trusted side of the FW.   I know throughput from Corp to a Squid to the PA is good, 600 Mbps, so it isn't connectivity between hosts.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!