- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
04-26-2018 08:43 AM
Since we upgrade traps to version 4. The Windows defender also install in endpoint is not being updated. So do you know if its possible to have Wdefender installed and being updated, in the same machine with traps???
04-26-2018 08:48 AM
Starting in v4 Traps started registering with Microsoft Security Center as the AV and Defender would be disabled. You can change this behavior if you desire to keep running Defender in tandem with Traps. It requires a change on the Traps ESM server using the DBCONFIG tool. There may be a KB entry on the support side or you might just want to open a ticket with support and request guidance.
04-26-2018 02:35 PM
Where can i get this KB?? its public? thanks
04-27-2018 05:44 AM
Here is a link to the info on DBCONFIG tool:
The specific info on how to configure Traps to not register as the system AV with Security Center is not listed there. My notes say that the command is "dbconfig server SecurityCenterEnabled false". It sure wouldnt hurt to open a ticket with support and verify that this is still correct and that you understand the impact.
Hope this helps!
04-27-2018 05:50 AM
Thanks a lot, i opened TAC case. Im waiting for response. Thanks a lot
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!