What triggers an autocommit?

What conditions will trigger an autocommit?

DNS service route doesn't work ?

Hi,

I am having troubles configuring dns service route for DNS.

DNS servers are behind tagged internal interface of PA-2050 device.

I was able to configure that for syslog and it sends all the traffic PA outbound to the server.

I was trying to do the sam

Certificate trust error after updating Global protect client

Folks.

I've finally managed to get approval to push out an update to the latest Global Protect client, but now when we connect, we get a certificate trust error. We are using a self-signed certificate for the portal.

I've applied the fix suggested in t

SNMP monitor parameters for Palo Alto

Hello,

I have two PA500 with software version 5.0 and i would like to know if i can monitorize using SNMP (Nagios) the following parameters of my Palo Alto.

- CPU Usage dataplane and management
- memory
- Current sessions
- Hard disk space
- State and use

Run multiple local script commands in CLI

Hi,

In my struggle to switch my captive portal rules on and off I want to run a script to achieve this.  I use a .bat file containing the following line:

c:\test\plink.exe -ssh 192.168.100.2 -l admin -pw mypassword -m c:\test\enable.txt

The file enable.

PBF: unused rules

Hey all,

I am using multiple PBF rules and am 100% sure that nearly half of them have been hit after the last reboot. However, when I select "Highlight unused rules", it highlights all my rules..

Anyone else seeing this?

Kind regards,

Bob

User Activity Reports

I really need some help in the correct process of running a user activity report. I have a request to pull the last 30 days of internet activity on a particular user. Every time I attempt this, I get strange results. Either the info only goes back 3

GlobalProtect release 1.2.7

Hello,

do you know when GP 1.2.7 will be release?

Original MAC Address of each interface on device

I have two Palo Alto devices and running HA.

When i run command on Active and passive device:

> show interface hardware

It only show the same MAC Address value of all interface.

I want to know original (physical) MAC Address of each interface on each d

What does not get uploaded in Config that needs changed via CLI?

We have a PA-500 that has a bad hard drive in it. We copied the config from the bad device and transferred it to the new RMA device they have sent us. on the GUI all the settings have transferred over just fine and nothing looks different. But when t

Management Interface outside of firewall

Knowing that one does not *usually* put a device management interface outside of the firewall, on the public Internet, in the case of PAN gateways is there any severe problem with this? I have a situation where putting the management of these devices