General Topics
Post a discussion here if you have general questions regarding configuration and troubleshooting for Palo Alto Networks products. Use this forum to collaborate with like-minded security professionals to improve your security posture.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Discussions

Welcome to the General Topics Discussions!

To make this forum valuable and enjoyable for everyone, please review the following guidelines before participating:

 

Rules and Best Practices

 

  1. Be Respectful: Treat fellow community members with professionalism and courtesy. Constructive discussion
...

JayGolf by Community Team Member
  • 179 Views
  • 0 replies
  • 0 Likes

Ensuring a Safe and Secure Community: How You Can Help

 

Dear LIVEcommunity Members,

 

Ensuring a top-tier experience on LIVEcommunity and protecting our members’ safety and security is our top priority! To this end, we have implemented additional security measures to safeguard our vibrant global commun

...

safe-community_oct24.jpg
report-content.jpg
jforsythe by Community Team Member
  • 601 Views
  • 0 replies
  • 2 Likes

Odd SSL-VPN Lock Ups

We are noticing that our SSL-VPN connection, whether using the Windows or Mac client, will just lock up for five minutes at a time. The status window shows that no packets are moving at all. Has anyone else had this problem?

We are running PAN OS 3.1.

...

mharding by L4 Transporter
  • 2254 Views
  • 1 replies
  • 0 Likes

Interface problème whene using aggregate with PAN-OS 3.0.10

Hi,

Whene triying to configure tow interfaces(eth1/17 and eth1/18) on a PAN-4020 device in an aggregate interface the interface eth1/18 never goes up. Whene switching the same cable on the eth1/19 all things works well. I have incountred this problem

...

asia by L3 Networker
  • 2134 Views
  • 1 replies
  • 0 Likes

Basic multiple-WAN-IP networking question

Some background, I am coming from a Sonicwall (which I'm not a big fan of, but I'm familiar with it) and I also have experience with the open-source pfSense system.  I'm not super-knowledgeable regarding subnetting, but I have a basic understanding a

...

bradenmcg by L3 Networker
  • 4617 Views
  • 3 replies
  • 0 Likes

Vlan information in logs

Device: PA-2050

OS: PANOS-3.0.6

Hi

I have a question about Vlan. In the different logs you cant find "source vlan" anywhere. I belive this is cause Palo Alto is a zone based firewall and you should use zones to separate different network types rather th

...

u2521 by Not applicable
  • 5633 Views
  • 6 replies
  • 0 Likes

Resolved! Scheduling policies and continuous tcp sessions

Dear Gentlemen,

Does anybody know how we can configure the policies to block a continuous TCP session when the schedule runs out?

The test we are trying to do is to block a skype discussion during a scheduled time.

During the 'allowed' time, we can laun

...

itbrain by L0 Member
  • 3947 Views
  • 3 replies
  • 0 Likes

Virtual-Wire connectivity during reboot

Hi all,

I know some IDS/IPS are able to keep the network connectivity during a reboot. Then it does not stop the trafic.

Does the PA able to do the same in Virtual-Wire mode ? Or in other mode ?

The aim is to upgrade the appliance in a production enviro

...

olev by Not applicable
  • 3739 Views
  • 2 replies
  • 0 Likes

Can I check if a connection was dropped by the firewall?

I frequently have people coming to me asking if I can check if a connection is dropped on the firewall.

Allow me to give you an example:

We have a trunk setup between a cisco callmanager and one from Alcatel. All traffic between the 2 systems flows thr

...

pieters by Not applicable
  • 4864 Views
  • 1 replies
  • 0 Likes

DHCP - Not setting Subnet, issues with PXE Boot

We are having an issue with our new Palo Alto 2050.

We are using the DHCP server on the 2050 in conjunction with a PXE to iSCSI system.

Using a different firewall/router with integrated DHCP server - the system works fine.

With the 2050 - it doesn't.

We

...

Labels