Hi there,
We have a particular setup with our remote sites that I am currently having an issue with.
On sites we use pfsense firewalls that have Ipsec tunnels setup to connect back to the PA system here at our main offices. This has all been fine up un
...
Hi,
We're using GlobalProtect client on many workstations. GP Agent is configured in SSO mode. This work flawlessly on Windows XP, 7, and some Windows 8 Pro PCs and tablets.
I just got a brand new Microsoft Surface Pro running Windows 8 Pro 64 bits. Fo
...
Hello,
I have a problem with Top Applications widget in dashboard PA-5020. There is huge difference beetwen this widget and ACC page.
Regards
Hi all,
Is there an effective way to send an email alert if a VPN tunnel is down? I checked several places in the web admin UI but could not find a good way to configure it.
Thanks!
PM
Hi
I found on this forum couple topic with examples but it desn't work for me - I don't know why.
I have Thread lod filled with vulnerability: "HTTP OPTIONS Method" (id 30520) and "SSL Double Client Hello Cipher Suite Length Mismatch" (id 32467)
I'd lik
...
Is there any good documentation for using LDAP in a Linux environment with PANOS 5?
We are having issues getting the firewall to pick up user ID's.
Hi,
We have internal DNS’s that send query EDNS packets and
those packets apparently are blocked by our Firewall (PA-3050 IOS Version
5.0.2)
I didn’t find any doc or discussion here about this issue
Could someone help me to allow those packets pass throug
...
I have a single remote firewall (pa-2020) where I would like to set up the console port to be accessible via dialup modem. I called Paloalto support and they only were able to say that most people use a terminal server like an avocent type server to
...
Hello
FW tust interface don't reply to traceroute.
traceroute reply traffic drop by 'ip ttl reaches zero' drop count.
what cli command to allow does 'ip ttl reaches zero' drop count ??
Hi All,
I've a HA Active/Active pair of PA-3020's managed via Panorama.
All was well until I had to replace one of the pair, I brought the new device into Panorama, added it to the correct group/templates and then finished the device config (IP address
...
Hi,
I am having troubles configuring dns service route for DNS.
DNS servers are behind tagged internal interface of PA-2050 device.
I was able to configure that for syslog and it sends all the traffic PA outbound to the server.
I was trying to do the sam
...
What will give you better results, User-ID Agents installed on domain controllers, or Server Monitoring from the firewall (agentless)?
Hi There,
I am kind of stuck on a problem for which I am unable to find a resolution ...
When I commit on my device after upgrading "Application and threats database" , I get an alert with the " application-filter -> nim 'nim' is already in use "
But
...
We have a PA5020 and recently enabled IPv6 throughout our network. We have been experiencing extremely slow internet connections and timeouts until we removed IPv6 from the inside and outside PA box Ethernet interfaces. Our ISP is Comcast and we have
...
Hi,
is it possible to assign a QoS Profile to a L3 Subinterface? In my configuration on 5.0.2 there is the possibility only to physical interfaces.
Best regards,
Robert
