2VR 2isp,2 seperate default GW (2 ppoe modems)
PC A ---- internet through ISP 1
we want to RDP TO ISP2's public ip and make destination NAT to PC A
How can we make this work ?
New enforce symmetric return did not work .commit fails with ppoe is not supported error.
Solved! Go to Solution.
*Network topology may change this method
If you can burn another port, put an L3 interface in VR2 on the same subnet as PC-A (or what ever subnet other trust interface is on). In the DST NAT rule create a SRC NAT also for the IP of the new L3 interface. Return traffic will come back there and route out VR2.
eth1/1 vr1 188.8.131.52 adsl1 dgw 184.108.40.206 WAN1
eth1/2 vr2 220.127.116.11 adsl2 dgw 18.104.22.168 WAN2
eth1/3 LAN 192.168.2.1 vr1
pbf 192.168.2.0 route eth1/1 to 22.214.171.124
126.96.36.199 RDP TO PC A
WAN2 WAN2 188.8.131.52/3389 Dest.nat 192.168.2.10/3389
so using eth1/4 vr2 192.168.2.2
wan2 wan2 184.108.40.206/3389 sourcenat interface eth 1/4 dest. 192.168.2.10/3389
is that what you mean ?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!