7.0 deployed on two fw's so far and all is well

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

7.0 deployed on two fw's so far and all is well

L1 Bithead

In the event anyone is curious- I've upgraded two PA-200's from 6.0.3 up to 7.0 (in a remote site and my science project at home). I am leaving the larger production FW's out of the mix for now until a couple of minor updates come along just to make sure Smiley Happy

I upgraded to 6.1.0, then 6.1.4 and finally to 7.0.0 on both 200's without issues. One is configured L3 trust and untrust, the other is L2 and L3 trust and L3 untrust.

So far:

No issues bringing my "legacy" policies over.

One of the two has a VPN tunnel back to corp and it came up and appears to be working reliably (that one also has dns proxy, DHCP and a few other things setup on it).

Throughput improved by >10% - particularly download speed (benchmarked with speedtest.net). Yes, I know- there are lies, darn lies and benchmarks...

Overall I like the new ACC look.

Not much to do with intrazone on these devices; that will sure come in handy on the bigger PA's I run at corp and colo sites when I upgrade them.

6 REPLIES 6

L2 Linker

RADIUS authentication with Challenge/Response seems to be broken. Besides that, I'm seeing good results with 7.0 as well.

:Loving it so far, haven't tested all the new features but I do like the LLDP addition and forcing all traffic down the GP VPN. But I have had a few kinks with it, nothing serious though.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!