looks like each palo is marking the path to the standby hsrp peer for a vlan as ecmp preferred path. Is this an issue? What does that mean axactly?
Ya Doesn't apply here since I am fully meshed not using route reflectors. This is because route reflectors will only insert the one BGP route in the route table as a method of loop prevention. Its a real killer actaully.
Gotcha. Perhaps this is more what you are looking for on the Cisco side?
I'm only finding ECMP articles on PAN related to eBGP.
I agree, there seems to be a lack of iBGP material, I am wondering it is because normally when BGP is involved you are running them at the edge and peering eBGP with your ISP.
Would mind elaborating how you are running active/active in vwire mode?
I am looking at how to use vwire behind a Check Point Cluster as an interim measure until the Palo's replace the Check Points.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!