Aggregate Interface Groups

cancel
Showing results for 
Search instead for 
Did you mean: 

Aggregate Interface Groups

L1 Bithead

Version 3.1.2, I do not see the option to select Aggregate Group.  Is there an initial step I am missing?  Thanks in advance.

8 REPLIES 8

L4 Transporter

hello Jaseng,

Go to Network-->Interfaces

Click on an interface.

Select Aggregate ethernet under the "type" drop down

You should then see the "Aggregate Group" drop down under the "Assign Interface to" field.

thank you,

Stephen

Hi Stephen - I do not see that option.  Here is a screenshot.

Thanks,

JASON

Link aggregation is only supported on the PA-4000 series. It looks like you are on a PA-500.

Mike

Mike - That is it.  I just looked at the 3.1 Admin Guide and I couldn't find where it states this is a PA-4000 series only feature.  Would my only option be to not create link agg and just group ports into a unique zone?

Thanks,

JASON

Jason

Grouping ports is not the same as using agg interface. When using agg interface, you have link redundancy. if one the links fails, the traffic is sent over the other one. All the links in the add bundle are up, all the links are utilized to send the traffic. You cannot accomplish this by grouping interfaces.

JP

It is captured in the release notes for 3.1

Shall I assume then, by your comment, that aggregate interfaces are not supported on the 2050 model also?

Correct. Aggregate interfaces are only supported on PA-4000 and PA-5000 series firewalls.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!