Aggregate Interface with sub-interface

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Aggregate Interface with sub-interface

L2 Linker

Dear all,

 

I am designing a new network for a client and they have lots of zones. my idea is to create an aggregate interface (ae1) and create sub-interfaces for the individual zone.

I read aggregate interface can be done on SD-WAN level and could not find any documents related to my design (Not SD-WAN). However, I found this post

https://live.paloaltonetworks.com/t5/general-topics/transitioning-from-a-physical-interface-with-sub....

 

can someone confirm it could be done which I am after? this is green field design

thank in advance

1 accepted solution

Accepted Solutions
2 REPLIES 2

L4 Transporter

L2 Linker

Hello Metgaz,

thank you for your time & for the last two links as well.

KR

  • 1 accepted solution
  • 3727 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!