- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
05-08-2013 06:48 PM
Hey guys I am having an issue with a 2 x 10Gb (vPC) port-channel between two Nexus 5548s and a PAN 5050. I can get the port channel to come up on both switches, however I get around 25% packet loss when pinging over it. I have changed the port channel load balancing to src-dst-ip and have tried a couple different configurations on the cisco side with no resolve. As soon as I shut one side of the vPC down it cleans up.
PAN: 5.1.5
Nexus: 6.0.2
Both sides of the vPC are configured the same and show up.
description PAN5050
switchport mode trunk
switchport trunk allowed vlan 128,135,159
channel-group 201
description PAN5050
switchport mode trunk
switchport trunk allowed vlan 128,135,159
vpc 201
SW-1: 201 Po201(SU) Eth NONE Eth1/1(P)
SW-2 201 Po201(SU) Eth NONE Eth1/1(P)
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!