Alarms on the PAN

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Alarms on the PAN

L1 Bithead

How do get alarms to work on the PAN device. I have gone in to Device --> Alarms and set security violations threshold to 1 and the time period to 3600. However, I do not get any alarms. How does this work exactly. I can set a "security violations threshod", but what exactly makes up a security violation?


Not applicable

According to the Admin Guide:

"Security Policy Limits An alarm is generated if a particular IP address or port hits a deny rule the

number of times specified in the Security Violations Threshold setting within

the period (seconds) specified in the Security Violations Time Period setting."

Do you have the Alarms Enabled for the CLI or Web?

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!