Allowing the PAN to respond to tracert

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Allowing the PAN to respond to tracert

Not applicable

I'm able to ping the interface and don't see any denies in the log, but when I traceroute through the PA-500 it does not respond.

The rest of the hops do respond, just not the PAN itself.


L6 Presenter

are you allowing both of the following applications in your security policy: ICMP and ping


The policy between the two zones in question are any application, any port.

What is your management policy for either interface?  If there is no management policy in place for an interface, IIRC it won't respond to ping or any other ICMP messages.

Also, make sure you are not suppressing any ICMP messages with a Zone Protection profile.



It was my zone protection, I unchecked "Suppress ICMP TTL expired error" and tracert works end to end.


Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!