We have a remote site connected behind ISP router and Meraki receives 192.168.X.X IP from it, and all networks locally are connected further to Meraki. The main site has public IP directly on the firewall. Not sure how to make configuration work.
We are having issues getting our information from our PaloAlto 5020's. It looks like it is sending but we do not have any chartable information on either of our netflow servers. We are using Solarwinds Netflow Traffic Analyzer as well as What's up
...
Dears,
first time for me write in PaloAlto forum I hope to find my answer here.
first, we have purchased PaloAlto 3020, and need the best design for the network securityز
My network content "1" switch L3 and "2" switches L2
and we have VLANs for use
...
Hi guys,
Strange issue here which I'm hopeing to get resolved. I was SSH'ed into the our PA VM-100 today and happened to run the command >ping host 8.8.8.8. This resulted in 100% (DUP!) replies on the ICMP replies. However, when I specify the sour
...
When making changes to firewalls through panorama, there is a history of those changes made. When you go to the dashboard there is a widget that shows the last handful of config changes, so I know they are there. Where in panorama can I go to view
...| User | Count |
|---|---|
| 13 | |
| 8 | |
| 5 | |
| 4 | |
| 4 |
OtakarKlier
on:
Upgrading PAN-OS active/passive question
reaper
on:
Change Font on Palo
| Subject | Likes |
|---|---|
| 3 Likes | |
| 3 Likes | |
| 3 Likes | |
| 2 Likes | |
| 2 Likes |
| User | Likes Count |
|---|---|
| 16 | |
| 14 | |
| 7 | |
| 7 | |
| 6 |
