Hi,
when adding an dynamic address gorup with a lot of criteria(each or criterias not and)
is there a way to learn which criteria related to which ip address.
when using command " show object dynamic-address-group all" I cannot understand which ip is re
...
I have a VPN setup to a destination that using ddns to keep the hostname across IP changes. This works fine as long as the remote end is initiating the tunnel, but it seems the PA cannot be configured to be able to also *initiate* the tunnel:
When the
...
We are experiencing a timeout across SFTP; while SSH seems to be set to timeout at 120 hours, SFTP transfers are timing out at the 1 hour marker.
Is this an expected result? And if so, can we adjust the timeout for SFTP specifically?
Thank you.
Hi Everyone - I have a 4050 HA pair (4.0.12), 2050 HA pair (5.0.1) and several 500's (5.0.3). I am looking to upgrade the software on all firewalls but have had issues (typically high CPU and memory issues) with all these versions of code. Can you
...
Hello ,
I need to route users between more than 2 VSYS. do you know if it's possible to route packet between more than 2 VSYS. PACKET IN-> VSYS1 -> VSYS2->VSYS3-> out. What is the limitation for the routing inter VSYS
thks for your help!
ALex
| User | Count |
|---|---|
| 13 | |
| 8 | |
| 5 | |
| 5 | |
| 4 |
MP18
on:
disabling global protect web portal
BPry
on:
OOM-Killer on 8.1 Trail (PA-5050 device)
BPry
on:
Creating a support case forwards me to LIVE community
BPry
on:
Inquiry about API key
BPry
on:
Failover but Cannot access WebGUI
BPry
on:
Hi, a Windows 10 with agent 7.9.1.26645 can´t upgrade windows after agent installation.
| Subject | Likes |
|---|---|
| 3 Likes | |
| 3 Likes | |
| 3 Likes | |
| 2 Likes | |
| 2 Likes |
| User | Likes Count |
|---|---|
| 14 | |
| 13 | |
| 7 | |
| 6 | |
| 4 |
