Best way to proxy HTTP traffic?

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Best way to proxy HTTP traffic?

Not applicable

Hey everyone,

Bit of a PAN n00b here, but working with a PA-500 in a small, low bandwidth environment. We want to use the PA to redirect all HTTP traffic from one network through a squid proxy in the same zone (but different subnets/interfaces). The proxy is open to traffic through port 3128, so would the best way be to set up NAT and a PBF rule to first translate the port, then forward to the proxy server? Just wondering what the best way to handle this would be and what the optimal configuration is.

I don't normally work with proxy servers, and am somewhat opposed to it. But bandwidth is scarce to say the least, and reducing traffic is essential to keeping costs down.


  • 0 replies
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!