- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
01-31-2012 04:11 PM
Hi All,
I'm trying to setup the Globalprotect VPN and have followed the (only partially helpful) GlobalProtect-Configuration-4.1.pdf to create certs and set everything up. When I try to connect to the portal site with my browser I get a certificate error - "Error code: sec_error_bad_signature".
It doesn't matter if I conect to the host name or the IP that I defined in the cert, I still get this error.
Does anyone know what the problem could be. Also, is there a way to actually see the certificates?
Thanks,
Kenton
01-31-2012 09:09 PM
Did you import the CA and the client cert to your browser?
I had that issue as well but importing "Installing" the CA and client certs to my browser fixed that issue.
Hope that helps.
02-01-2012 02:28 AM
Dear
i also have the same Problem and not yet to figure out.
02-01-2012 08:44 AM
Do you mean use the FQDN when creating the certs? At this point my portal doesn't ahve a FQDN.
02-01-2012 08:57 AM
Thanks @mbehlok, that helped a bit, now I get a 404 error saying /uro/ was not found on this server. Must be more that I'm missing inthe setup I guess. Any thoughts?
02-01-2012 09:03 AM
I too am getting this same error. I followed the document "GlobalProtect Configuration for 4.1" as much as I could. My Portal/Gateway does not have a FQDN, just an IP address.
Edit: Importing the Global Protect Gateway Cert allows my browser to reach the portal. BUT, I can not log in, and I get a message on the portal saying "Invalid client certificate".
02-01-2012 09:51 AM
I had a similar issue. I would get a certificate malformed error when trying to connect to the portal. I deleted all the certificates and started over. I was using underscores in the name for each certificate, I changed this to hyphens and made sure to fill out all the fields and it seemed to resolve the issue. Not sure why it did however and there is a chance that I had changed something else unknowingly during the process. It’s worth a shot I guess…
02-01-2012 07:57 PM
Does anyone succeed in configuring Globalprotect with OS 4.1 ? please help sharing !!!!!
02-01-2012 08:09 PM
Ovan,
I actually got it to work, and it seems to work very well, at least once I got the certificates to work.
What can I do to help? I can post up part of the configuration if that will help, or even some screen shots of the GUI.
Or if you want, get me access to the firewall if its in a lab environment and I can see if I can help out.
my direct email is mbehlok (at) sslmeetings.com
BTW, GP 1.1.2 is out, give that client a try as well as it seems to work better for me.
02-01-2012 10:50 PM
Thanks mbehlok,
please help to post up your configuration guide with screenshots. I followed the " Configuring GlobalProtect 4.1 guide" But i didn't work.
02-02-2012 06:06 AM
So I finally got Global Protect to work on 4.1.2. Following the "Configuring GlobalProtect" guide won't get you anywhere. Apparently using the Palo Alto as a CA server does not work So the steps in the guide where it tells you to create a CA cert, and then the 2 other certs, do not apply. I had a Palo Alto Support Engineer take a look at our setup. What he did to make it work...
1) Generate a plain Cert in Palo Alto(Not signed and not a Certificate Authority)
2) Global Protect > Portals > Your Portal > Portal Configuration > Set "Client Certificate" and "Client Certificate Profile" to "None". Set "Server Certificate" to the Cert you made in step 1.
3) Move to Client Configuration tab > Delete any Root CA's that are set.
4) Global Protect > Gateways > Your Gateway > General > Set "Server Certificate" to the Cert you created in step 1. Set "Client Certificate Profile to "None".
02-02-2012 08:03 AM
Thanks for the update Jambulo.
I was actually able to get it to work by using the PA as the CA server.
I did have to upload the CA Cert and the Client certs to my client though in order for the client to connect, before that I kept getting cert errors.
I am on 4.1.2 PanOS and GP 1.1.2.
Glad you got it working though.
02-08-2012 04:17 PM
Using a single certificate also worked for me. I had an SE come in and go through all my configuration stuff and still ran into the same error. When we did it using the single cert, everything worked fine. Since the cert is only to secure the portal to login and get the client, a single certificate should be sufficient. This also means you don't have to install the client and root cert on every machine that is going to connect to the portal. This would also enable you to use a third-party web certificate to avoid the cert error on connecting to the portal.
Thanks everyone for your help.
Of course, none of this stuff negates the fact that the documentation for this whole process is bad and in many cases just plain wrong. I'm finding that this is a trend in the Palo Alto documentation.
02-09-2012 07:31 AM
This is an interesting thread. I have been using GP since the original release. I agree that the guide is very vague and doesn't help much.
Attached are screen shots of my config with OS 4.1.2 and GP client 1.1.2-9 and all works well. We use a root CA and sign all of the server and client certs with the CA.
Hope this helps.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!