03-16-2021 09:36 AM - edited 03-16-2021 09:37 AM
We have two Aruba wireless controllers in a master / secondary configuration. Each one has a trunk port which contains about a dozen VLANs with our guest wireless traffic. The VLANs are arbitrarily assigned to the trunk ports by the controllers and can change depending on network conditions (from what I understand). The PA-220 is the gateway for the private IP ranges assigned to each of those VLANs.
My question is can I directly connect those two trunk ports to the PA, or will I need an intermediate smart switch to aggregate the two trunks into a single cable that connects to the PA?
03-16-2021 03:12 PM
if you don't have a switch you can put 2 of the pa-220 ports in layer2 mode and configure sub interfaces for each vlan
if you need a 'default gateway' in ech vlan you can create vlan interfaces to provide routing
hope that helps!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
