We have two PA's connecting to one ISP. One is just being set up.
The ISP is "10.10.10.0/27"
Route is "10.10.10.5"
Is it correct to have both firewall external vlan interfaces as such
And for the NAT
FW1 Main Nat "10.10.10.99/27"
FW2 Main Nat "10.10.10.122/27"
I ask, because the new firewall is logging packets for the old firewall. I am seeing "x.x.x.99" on the firewall with VIP "x.x.x.122"
- If your ISP's subnet is 10.10.10.0/27 , you have usable IP addresses 10.10.10.1 to 10.10.10.30, so your firewalls would need to have an IP in that range
- your vlans are untagged, you'll want to tag them and use proper vlans on your switches to prevent having one giant, and insecure broadcast domain
are there any other nat rules? it's possible your old firewall has taken ownership of all the IP's in that subnet if there's a NAT policy that allows it
The IP's were just an obscured example.
Both have the same "/27" on the interface and is that correct?
Neither firewall has overlapping NAT IP addresses. the NAT addresses are x.x.x.y/27
I have the VLANS tagged on the aggregate interface, I assume that is sufficient and does not need tagged on the VLAN aswell. The switches are VLANED.
May I ask why you are using VLAN interfaces to begin with? I avoid this if at all possbile. I would recommend using sub-interfaces at Layer 3. It is easier to manage, easier to read and makes your zone/ruleset clean. If you're not transporting Layer 2 traffic through the firewall, VLAN interfaces are almost unnecessary. Thoughts?
Lab Example -
TBH never realy thought about it too much, It was how our original firewall was configured and how I have built things in the test labs. Can't even reember how we did it during the training course.
I can see it's a bit cleaner having converted it all over.
Not even sure why I did not twig it was a possibility as I am running a L3 single interface at the moment to the outside world
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!