I created day 1 config file for my PA-410 model firewall and loaded the configuration. But while commiting Got below error:
"email-scheduler -> Possible Compromise -> report-group 'Possible Compromise' is not a valid reference
email-scheduler -> Possible Compromise -> report-group is invalid "
When I double checked the file I downloaded from Palo-alto portal all these configuration are inside <shared..</shared> xml tag, Not sure why shared tag is coming in picture for palo-alto
Kindly suggest on the same.
Hi @Sujanya ,
Can you try removing the report group "Possible Compromise" and commit once removed?
By design, the new firmware and PAN-410 don't have local data logging ability so the monitor tab reduces. The day1 config breaks due to the report group config on a device that doesn't support logging. Worked around it by removing the "Possible Compromise" section in the day1 XML and then uploading it.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!